产品banner
Your current location : Home >> 大连Synthetic cutting fluid

Contact UsContact Us

Yingkou kangru Technology Co., Ltd

Contact: Mr. Zhao

Telephone: +86-18841775200 

Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province

Post Code: 115005

Website: http://www.kangru.com/en



大连Total synthesis concentrated compound solution

大连Total synthesis concentrated compound solution

  • Cname:大连Synthetic cutting fluid
  • Views:Times
  • Release date:2021-01-11 11:45:11
  • Content

1、 Overview

This product contains high efficiency lubricant, antirust agent and other ingredients to meet the current requirements of high performance machining. Different concentrations can be selected according to different processing conditions. Because it does not contain oil, this product has more advantages than conventional emulsified cutting oil.

(1) Excellent cleaning performance (2) good stability (3) no peculiar smell (4) excellent cooling performance (5) good antirust performance

2、 Performance

·It has excellent extreme pressure resistance and is suitable for processing high hardness metals. ·The cutting fluid is transparent and easy to observe the working face.

·It does not produce oil mist of petroleum products and is good for occupational health. ·Provides excellent corrosion and rust protection.

No oil, no gel residue, avoid plugging the infusion pipe. ·Long time use of cutting fluid does not stink.

·Biodegradable - easy to decompose in major waste treatment. ·It does not contain nitrite, heavy metal salts and phenols.

·It has excellent cooling effect and reduces tool wear. ·It can clean the surface dirt of the processed parts.

3、 Typical data

Appearance of concentrated liquid: brown red transparent liquid;

Diluent (5%) appearance: colorless, transparent or translucent;

Density 20 ℃ g / cm 3:1.06

PH value: 8-10

Foam performance (Shi Wen): qualified

Rust resistance: cast iron single piece 35 ± 2 ℃ 24 hours; lamination 4 hours without rust.

4、 How to use it

The concentrated solution is diluted with twice water to be a common cutting fluid, and then used according to the ratio of 3-5% for general grinding and 5-15% for medium and heavy load cutting.

5、 Precautions

1. When preparing new liquid, we should follow the principle of draining water first, then adding original liquid, and mixing evenly before using.

2. The total hardness of industrial water used for preparation shall not exceed 300ppm, otherwise the stability of working fluid may be reduced.

3. The equipment is equipped with magnetic filter and other filtering devices to remove impurities in time.

4. This product should not be mixed with other cutting fluids, so as not to affect the use effect. If it needs to be mixed, it needs to be tested before it can be used.

6、 Packaging, storage and transportation

1. 20 L, 200 L barrel.

2. 5 ~ 35 ℃. In the process of storage and transportation, it is necessary to prevent moisture and impurities from mixing, so as to avoid product deterioration.

This product is non-toxic, non combustible, and can be used for general commodity storage and transportation.


Tags

0

Recently Viewed:

Copyright © Yingkou kangru Technology Co., Ltd support: Yingkou Zhongchuang Network Technology Co., Ltd