Contact: Mr. Zhao
Telephone: +86-18841775200
Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province
Post Code: 115005
Website: http://www.kangru.com/en
1、 Overview
This product is designed with environmental protection materials, with good cleaning, chip removal, arc extinguishing performance. No peculiar smell, good permeability, easy to penetrate into the cutting surface, timely remove the chips and electrical corrosion products. The cutting surface is easy to clean and has no greasy substance. It has no disadvantages of traditional emulsified oil, and is not easy to corrupt and stink. The operating table and pipeline are clean. It is suitable for cutting workpieces of different materials. The effect is especially obvious when the thickness is less than 400mm. The product has good lubrication and anti rust, cutting surface without reversing stripes, no discoloration, no corrosion. Stable processing, long service life of bath solution, not easy to rot in summer.
2、 Main technical specifications
project | quality index | test method | ||
Stock solution | appearance | Yellow oily liquid | Visual inspection | |
bin stability | qualified | JB/T 7453-94 | ||
Diluent 10% | appearance | Yellow white translucent | Visual inspection | |
Rust resistance (35 ℃± 2 ℃) First class gray cast iron | Single chip 24h | qualified | JB/T 7453-94 | |
Lamination 4H | qualified | |||
corrosion test (full immersion at 55 ℃± 2 ℃) | First class gray cast iron | qualified | ||
Red copper 4H | qualified | |||
Surface tension (Mn / M) | ≤40 | |||
Defoamer ml / 10min ≤ | 2 | |||
3、 How to use it
The recommended concentration of this product is 8-10. It can also be adjusted up or down according to the difference of workpiece material, thickness and equipment performance. When preparing the diluent, the principle of draining water first and then adding the original solution should be followed, and the diluent can be used only after the circulation is uniform.
4、 Precautions
1. Try to use tap water to prepare working fluid. If the water quality is too good, it should be softened.
2. This product should not be mixed with other cutting fluids, so as not to affect the use effect.
3. 5 ~ 35 ℃ indoor sealed storage. In the process of storage and transportation, prevent the mixing of water and impurities, so as to avoid product deterioration.
5、 Packaging, storage and transportation
1. It is packed in 20L and 200L barrels.
2. This product is non-toxic and non combustible. It can be stored and transported as a general commodity.
