Temper fluid

Temper fluid

detail

1、 Overview


This product uses organic amine and organic acid as compound antirust agent, and compounded with a variety of corrosion inhibitors and cleaning aids. The compound leveling fluid has excellent cleaning performance and good anti rust performance. After leveling, there is no corrosion and spot on the surface of the steel plate. The quality of the steel plate is good, and it has good compatibility with the anti rust oil provided by our company.


2、 Technical index


     Projects

quality index

test method


Concentrated solution

bin stability

Above 0 ℃


No delamination, phase change and colloid

GB/T 6144-2010

appearance

Yellow to brownish red transparent liquid

Visual inspection

Diluent 5%

transparency

Transparent or translucent

 

 

 

 

GB/T 6144-2010

PH value

8.0~9.0

Antirust test (35 ℃± 2 ℃ grade I gray cast iron), H

monolithic

24

Lamination

4

Corrosion test (55 ℃± 2 ℃), H

Grade I gray cast iron 24

qualified

Red copper 4

qualified

Defoaming property (10 min)

≤2ml

Surface tension / (Mn / M))

≤40


Note: the concentration is 5%.


3、 Main performance and advantages


1. Good anti rust and anti-corrosion performance, effectively protect the work roll.


2. Good cleaning performance, improve the cleanliness of the steel strip, prevent the formation of debris on the roll and on the steel strip. Surface formation


Mark, reduce the work roll fouling.


3. Effectively control the reduction rate and avoid slipping.


4. Compatible with steel plate coating oil.


5. Prevent grease / oil contamination.


4、 Usage and precaution


Before using it, dilute it with deionized water. The recommended concentration is 8-10%. During the cold rolling process, a controlled sprayer is sprayed onto the steel strip and the inlet side of the lower surface. Spray at a rate of about 5 L / min (the specific data shall be determined according to the rolling speed, strip width and air blowing device) so as to completely cover the rolling width, but avoid excessive use. Any excess leveling fluid brought into the roll gap is usually removed by a blower.

5、 Packaging and storage

The product is packed in 200kg iron barrel and is valid for one year.


分享到