thixotropic anti-rust oil
detail
Thixotropic antirust oil
1、 Overview
It is a general purpose anti rust oil without barium and with thixotropy. This product uses kangru ep-98 to provide excellent anti rust, thixotropy and lubrication under light load. Due to its thixotropy, it has the property of changing fluid when stirring, so its oil film can be repaired automatically
2、 Technical index
Projects | quality index | test method | |
Oil based appearance | Brown oily liquid | Visual inspection | |
Flash point (opening), | ≥200℃ | GB/T3536 | |
Damp heat test (49 ℃± 1 ℃) Grade 192h > 95% RH | steel | A | GB/T2361 |
Corrosion test (mass change), mg / cm2 | steel | ±0.2 | SH/T0080 |
copper | ±1.0 | ||
aluminum | ±0.2 | ||
Salt spray test (35 ℃± 2 ℃) for 24h Salt spray amount: 1.0ml/80cm2. H, not lower than Grade A | steel | A | SH/T0081 |
Kinematic viscosity, 40 ℃ mm2 / S | 35～40℃ | GB/T265 | |
Membrane type | Thixotropic dry lipid membrane | ||
3、 Use method (see the operation instruction for details)
First, the workpiece is strictly pretreated to remove impurities, moisture, residual acid, alkali and other foreign matters on the surface, and keep the workpiece dry and clean. Then, the product is stirred into a fluid and coated on the surface of the workpiece.
4、 Precautions
1. Do not mix this product with other antirust products without test, so as not to affect the product performance.
2. It should be stored in a sealed room at 0 ~ 35 ℃ to avoid sunlight and rain, prevent moisture and impurities from entering, and pay attention to indoor ventilation and exhaust.
3. This product is flammable. Do a good job in fire protection during storage and use to avoid fire.
5、 Packaging
Packed in 17 kg or 170 kg barrels